These settings normally do not need to be changed.
Enabling Super-G mode may increase the overall wireless performance if you have compatible wireless stations.
Default: Disable
WMM (Wireless Multimedia) is a subset of the 802.11e standard. WMM allows wireless traffic to have a range of priorities, depending on the kind of data. Time-dependent information, like video or audio, will have a higher priority than normal traffic. For WMM to function correctly, Wireless clients must also support WMM.
Select Enable or Disable as required.
Default: Disable
Request to Send Threshold. The packet
size that is used to determine if it should use the CSMA/CD (Carrier Sense
Multiple Access with Collision Detection) mechanism or the CSMA/CA mechanism
for packet transmission. With the CSMA/CD transmission mechanism, the
transmitting station sends out the actual packet as soon as it has waited for
the silence period. With the CSMA/CA transmission mechanism, the transmitting
station sends out an RTS packet to the receiving station, and waits for the
receiving station to send back a CTS (Clear to Send) packet before sending the
actual packet data.
Default: 2346
This is the maximum packet size used for fragmentation. Packets larger than the size programmed in this
field will be fragmented. The Fragment Threshold value must be larger than the RTS Threshold value and must be even number.
Default: 2346
The Beacon Interval specifies the
interval time (between 20ms and 1000ms) for each beacon transmission.
Default: 100
The DTIM (Delivery Traffic Indication Message) specifies the data beacon rate between 1 and 255.
Default: 1
A long transmit preamble may provide a more reliable connection or slightly longer range.
A short transmit preamble gives better performance.
Auto will automatically handle both long and short preamble.
Default: Auto